99 ways to make your computer blazingly fast

Over the last several years working in IT for various companies as a Systems Administrator, Network Administrator, and Help Desk professional, I’ve written and learned about many ways to increase the performance of not only my PC, but also of the many PCs on my networks ranging from Windows 98 to Windows Vista.

In this article, I hope to compile a complete list of all the different methods and tricks that I’ve used to get the last bit of juice out of a slow PC. Whether you are using an old PC or the latest and greatest in hardware, you can still use some of these to make your PC run faster.

Note that since I write two blogs, Help Desk Geek and Online Tech Tips, I have previously written about many performance tips already which I will link back to throughout. If I have not written about it, I’ve throw in a link to a relevant article from some of my other favorite sites. This list is in no particular order, just written in the order that I could think of them.

There are probably a lot of great tweaks and performance hacks that I’ve missed here, so feel free to chime in with comments! Enjoy!

1. Defragment your computer hard disk using free tools like SmartDefrag.

2. You should also defragment your Windows pagefile and registry.

3. Clean up hard drive disk space being taken up by temporary files, the recycle bin, hibernation and more. You can also use a tool like TreeSize to determine what is taking up space on your hard drive.

4. Load up Windows faster by using Startup Delayer, a free program that will speed up the boot time of Windows by delaying the startup of programs.

5. Speaking of startup programs, many of them are useless and can be turned off. Use the MSCONFIG utility to disable startup programs.

6. By default, the size of the paging file is controlled by Windows, which can cause defragmentation. Also, the paging file should be on a different hard drive or partition than the boot partition. Read here on the rules for best paging file performance.

7. In Windows XP and Vista, the Windows Search indexing service is turned on for all local hard drives. Turning off indexing is a simple way to increase performance.

8. If you don’t care about all the fancy visual effects in Windows, you can turn them off by going to Performance Options.

9. You can optimize the Windows boot time using a free program called Bootvis from Microsoft.

10. Clean your registry by removing broken shortcuts, missing shared DLLs, invalid paths, invalid installer references and more. Read about the 10 best and free registry cleaners.

11. One of the main reasons why PC’s are slow is because of spyware. There are many programs to remove spyware including Ad-Aware, Giant Antispyware, SUPERAntiSpyware, and more.

12. If you have a deeper spyware infection that is very hard to remove, you can use HijackThis to remove spyware.

13. Remove unwanted pre-installed software (aka junk software) from your new PC using PC Decrapifier.

14. Disable unnecessary Windows services, settings, and programs that slow down your computer.

15. Tweak Windows XP and tweak Windows Vista settings using free programs

16. Disable UAC (User Account Control) in Windows Vista

17. Tweak your mouse settings so that you can copy and paste faster, scroll faster, navigate quickly while browsing and more. Read here to learn how to tweak your mouse.

18. Delete temporary and unused files on your computer using a free program like CCleaner. It can also fix issues with your registry.

19. Delete your Internet browsing history, temporary Internet files, cookies to free up disk space.

20. Clean out the Windows prefetch folder to improve performance.

21. Disable the XP boot logo to speed up Windows boot time.

22. Reduce the number of fonts that your computer has to load up on startup.

23. Force Windows to unload DLLs from memory to free up RAM.

24. Run DOS programs in separate memory spaces for better performance.

25. Turn off system restore only if you regularly backup your Windows machine using third party software.

26. Move or change the location of your My Documents folder so that it is on a separate partition or hard drive.

27. Turn off default disk performance monitors on Windows XP to increase performance.

28. Speed up boot time by disabling unused ports on your Windows machine.

29. Use Process Lasso to speed up your computer by allowing it to make sure that no one process can completely overtake the CPU.

30. Make icons appear faster while browsing in My Computer by disabling search for network files and printers.

31. Speed up browsing of pictures and videos in Windows Vista by disabling the Vista thumbnails cache.

32. Edit the right-click context menu in Windows XP and Vista and remove unnecessary items to increase display speed.

33. Use the Windows Performance Toolkit and the trace logs to speed up Windows boot time.

34. Speed up your Internet browsing by using an external DNS server such as OpenDNS.

35. Improve Vista performance by using ReadyBoost, a new feature whereby Vista can use the free space on your USB drive as a caching mechanism.

36. If you have a slow Internet connection, you can browse web pages faster using a service called Finch, which converts it into simple text.

37. Use Vista Services Optimizer to disable unnecessary services in Vista safely.

38. Also, check out my list of web accelerators, which are programs that try to prefetch and cache the sites you are going to visit.

39. Speed up Mozilla Firefox by tweaking the configuration settings and by installing an add-on called FasterFox.

40. Learn how to build your own computer with the fastest parts and best hardware.

41. Use a program called TeraCopy to speed up file copying in Windows XP and Vista.

42. Disable automatic Last Access Timestamp to speed up Windows XP.

43. Speed up the Start Menu in Vista by hacking the MenuShowDelay key in the registry.

44. Increase the FileSystem memory cache in Vista to utilize a system with a large amount of RAM.

45. Install more RAM if you are running XP with less than 512 MB or Vista with less than 1 GB of RAM.

46. Shut down XP faster by reducing the wait time to kill hung applications.

47. Make sure that you have selected “Adjust for best performance” on the Performance tab in System Properties.

48. If you are reinstalling Windows, make sure that you partition your hard drives correctly to maximize performance.

49. Use Altiris software virtualization to install all of your programs into a virtual layer that does not affect the registry or system files.

50. Create and install virtual machines for free and install junk program, games, etc into the virtual machines instead of the host operating system. Check out Sun openxVM.

51. Do not clear your paging file during shutdown unless it is needed for security purposes. Clearing the paging file slows down shutdown.

52. If your XP or Vista computer is not using NFTS, make sure you convert your FAT disk to the NTFS file system.

53. Update all of your drivers in Windows, including chipset and motherboard drivers to their latest versions.

54. Every once in a while run the built-in Windows Disk Cleanup utility.

55. Enable DMA mode in Windows XP for IDE ATA/ATAPI Controllers in Device Manager.

56. Remove unnecessary or old programs from the Add/Remove dialog of the Control Panel.

57. Use a program click memtest86 or Prime95 to check for bad memory on your PC.

58. Determine your BIOS version and check the manufactures website to see if you need to update your BIOS.

59. Every once in a while, clean your mouse, keyboard and computer fans of dust and other buildup.

60. Replace a slow hard drive with a faster 7200 RPM drive, SATA drive, or SAS drive.

61. Changing from Master/Slave to Cable Select on your hard drive configuration can significantly decrease your boot time.

62. Perform a virus scan on your computer regularly. If you don’t want to install virus protection, use some of the free online virus scanners.

63. Remove extra toolbars from your Windows taskbar and from your Internet browser.

64. Disable the Windows Vista Sidebar if you’re not really using it for anything important. All those gadgets take up memory and processing power.

65. If you have a SATA drive and you’re running Windows Vista, you can speed up your PC by enabling the advanced write caching features.

66. Learn how to use keyboard shortcuts for Windows, Microsoft Word, Outlook, or create your own keyboard shortcuts.

67. Turn off the Aero visual effects in Windows Vista to increase computer performance.

68. If you are technically savvy and don’t mind taking a few risks, you can try to overclock your processor.

69. Speed up the Send To menu in Explorer by typing “sendto” in the Run dialog box and deleting unnecessary items.

70. Make sure to download all the latest Windows Updates, Service Packs, and hot fixes as they “normally” help your computer work better.

71. Make sure that there are no bad sectors or other errors on your hard drive by using the ScanDisk orchkdsk utility.

72. If you are not using some of the hardware on your computer, i.e. floppy drive, CD-ROM drive, USB ports, IR ports, Firewire, etc, then go into your BIOS and disable them so that they do not use any power and do not have to be loaded during boot up.

73. If you have never used the Recent Documents feature in Windows, then disable it completely as a long list can affect PC performance.

74. One basic tweak that can help in performance is to disable error reporting in Windows XP

75.  If you don’t care about a pretty interface, you should use the Windows Classic theme under Display Properties.

76. Disable short filenames if you are using NTFS by running the following command: fsutil behavior set disable8dot3 1. It will speed up the file creation process.

77. If you have lots of files in a single folder, it can slow down Explorer. It’s best to create multiple folders and spread out the files between the folders.

78. If you have files that are generally large, you might want to consider increasing the cluster size on NTFS to 16K or even 32K instead of 4K. This will help speed up opening of files.

79. If you have more than one disk in your PC, you can increase performance by moving your paging file to the second drive and formatting the volume using FAT32 instead of NTFS.

80. Turn off unnecessary features in Vista by going to Control Panel, choosing Uninstall a program, and then clicking on Turn Windows features on and off. You can turn off Remote Differential Compression, Tablet PC components, DFS replication service, Windows Fax & Scan, Windows Meeting Space, and lots more.

81. Install a free or commercial anti-virus program to help protect against viruses, etc. Make sure to use an anti-virus program that does not hog up all of your computer resources.

82. Completely uninstall programs and applications using a program like Revo Uninstaller. It will get rid of remnants left behind by normal uninstalls.

83. If you know what you are doing, you can install several hard drives into your machine and set them up in RAID 0, RAID 5, or other RAID configurations.

84. If you are using USB 1.0 ports, upgrade to 2.0. If you have a Firewire port, try to use that instead of a USB port since Firewire is faster than USB right now.

85. Remove the drivers for all old devices that may be hidden in Device Manager that you no longer use.

86. A more extreme option is to choose a faster operating system. If you find Vista to be slow, go with Windows XP. Switching to Mac or Linux is also an option.

87. One of the easiest ways to speed up your PC is to simply reformat it. Of course, you want to backup your data, but it is the best way to get your computer back to peak performance.

88. Speed up Internet browsing in IE by increasing the number of max connections per server in the registry.

89. If you use uTorrent to download torrents, you can increase the download speeds by tweaking the settings.

90. If you have a desktop background, make sure it’s a small and simple bitmap image rather than a fancy picture off the Internet. The best is to find a really small texture and to tile it.

91. For the Virtual Memory setting in Windows (right-click on My Computer, Properties, Advanced, Performance Settings, Advanced, Virtual Memory), make sure the MIN and MAX are both the same number.

92. If you search on Google a lot or Wikipedia, you can do it much faster on Vista by adding them to the Vista Start Menu Instant Search box.

93. If you have a custom built computer or a PC that was previously used, make sure to check the BIOS for optimal settings such as enabled CPU caches, correctly set IDE/SATA data transfer modes, memory timings, etc. You can also enable Fast/Quick boot if you have that option.

94. If you have a SCSI drive, make sure the write cache is enabled. You can do so by opening the properties of the SCSI drive in Windows.

95. If you have a machine with an older network card, make sure to enable the onboard processor for the network card, which will offload tasks from the CPU.

96. If you are using Windows Vista, you can disable the Welcome Center splash screen that always pops up.

97. If you already have anti-spyware software installed, turn off Windows Defender protection.

98. If you are running a 32-bit version of Windows and have 4GB of RAM or more, you can force Windows to see and use all of the RAM by enabling PAE.

99. Buy a new computer!!! ;) Pretty easy eh?

Advertisements

Tracking down uptime in Windows XP

Have you ever wondered how long your Windows XP system has been running since the last reboot? If so, this handy Windows XP tip will show you how to find out your system’s uptime.
Here’s how:
  1. Open a Command Prompt window.
  2. Type the following command:
    Systeminfo | Find “Up Time”
Posted in Tricks. Tags: , , . 1 Comment »

5 ways to speed up your PC

By following a few simple guidelines, you can maintain your computer and keep it running smoothly. This article discusses how to use the tools available in Windows to more efficiently maintain your computer and safeguard your privacy when you’re online.

Free up disk space

By freeing disk space, you can improve the performance of your computer. The Disk Cleanup tool helps you free up space on your hard disk. The utility identifies files that you can safely delete, and then enables you to choose whether you want to delete some or all of the identified files.
Use Disk Cleanup to:

Remove temporary Internet files.
Remove downloaded program files (such as Microsoft ActiveX controls and Java applets).
Empty the Recycle Bin.
Remove Windows temporary files.
Remove optional Windows components that you don’t use.
Remove installed programs that you no longer use.

Tip: Typically, temporary Internet files take the most amount of space because the browser caches each page you visit for faster access later.

To use Disk Cleanup

1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Disk Cleanup. If several drives are available, you might be prompted to specify which drive you want to clean.

Image of Disk Cleanup dialog box

2. In the Disk Cleanup for dialog box, scroll through the content of the Files to delete list.

Image of Disk Cleanup for dialog box

Choose the files that you want to delete.

3. Clear the check boxes for files that you don’t want to delete, and then click OK.
4. When prompted to confirm that you want to delete the specified files, click Yes.

After a few minutes, the process completes and the Disk Cleanup dialog box closes, leaving your computer cleaner and performing better.

Speed up access to data

Disk fragmentation slows the overall performance of your system. When files are fragmented, the computer must search the hard disk when the file is opened to piece it back together. The response time can be significantly longer.

Disk Defragmenter is a Windows utility that consolidates fragmented files and folders on your computer’s hard disk so that each occupies a single space on the disk. With your files stored neatly end-to-end, without fragmentation, reading and writing to the disk speeds up.

When to run Disk Defragmenter
In addition to running Disk Defragmenter at regular intervals—monthly is optimal—there are other times you should run it too, such as when:

You add a large number of files.
Your free disk space totals 15 percent or less.
You install new programs or a new version of Windows.

To use Disk Defragmenter:

1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Disk Defragmenter.

Image of the Disk Defragmenter dialog box

Click Analyze to start the Disk Defragmenter.

2. In the Disk Defragmenter dialog box, click the drives that you want to defragment, and then click the Analyze button. After the disk is analyzed, a dialog box appears, letting you know whether you should defragment the analyzed drives.

Tip: You should analyze a volume before defragmenting it to get an estimate of how long the defragmentation process will take.

3. To defragment the selected drive or drives, click the Defragment button. Note: In Windows Vista, there is no graphical user interface to demonstrate the progress—but your hard drive is still being defragmented.

After the defragmentation is complete, Disk Defragmenter displays the results.

4. To display detailed information about the defragmented disk or partition, click View Report.
5. To close the View Report dialog box, click Close.
6. To close the Disk Defragmenter utility, click the Close button on the title bar of the window.

For more information on disk defragmentation, Link

Detect and repair disk errors

In addition to running Disk Cleanup and Disk Defragmenter to optimize the performance of your computer, you can check the integrity of the files stored on your hard disk by running the Error Checking utility.

As you use your hard drive, it can develop bad sectors. Bad sectors slow down hard disk performance and sometimes make data writing (such as file saving) difficult, or even impossible. The Error Checking utility scans the hard drive for bad sectors, and scans for file system errors to see whether certain files or folders are misplaced.

If you use your computer daily, you should run this utility once a week to help prevent data loss.

To run the Error Checking utility:

1. Close all open files.
2. Click Start, and then click My Computer.
3. In the My Computer window, right-click the hard disk you want to search for bad sectors, and then click Properties.
4. In the Properties dialog box, click the Tools tab.
5. Click the Check Now button.
6. In the Check Disk dialog box, select the Scan for and attempt recovery of bad sectors check box, and then click Start.

Image of Check Disk dialog box

7. If bad sectors are found, choose to fix them.

Tip: Only select the “Automatically fix file system errors” check box if you think that your disk contains bad sectors.

Protect your computer against virus and spyware

A computer virus is a computer program that can copy itself and infect a computer without the permission or knowledge of the owner. The term “virus” is also commonly but erroneously used to refer to other types of malware, adware and spyware programs that do not have the reproductive ability. A true virus can only spread from one computer to another (in some form of executable code) when its host is taken to the target computer.

Spyware collects personal information without letting you know and without asking for permission. From the Web sites you visit to usernames and passwords, spyware can put you and your confidential information at risk. In addition to privacy concerns, spyware can hamper your computer’s performance.

To combat spyware, you might want to consider my personal recommendation ESET NOD32 Internet Security.  Alternatively, there are other free antivirus and anti-spyware software programs available.

Learn all about Tweaking

Download TuneUP Utilities to do all the above all in one place with a lot of other tweaking like Registry cleaning, registry defragmenting and alot more. You can also use CCleaner or TweakUI as a free alternative.

Must Have Softwares

Windows Installation Story

Today i decided to install a fresh copy of Windows. The previous installation was almost an year old and as usual slowed down a lot and messed up too. I searched the drawers for Windows XP, didn’t found any. Asked my mom about the CD, she answered, “why the hell should I know about CDs, I don’t own this PC, you do.”

At last without searching further I went to Jumbo CD shop. The shopkeeper pointed at a CD rack having Windows collection. I decided to stick to Windows XP as I didn’t want to experiment on Vista or 7 with my current PC specifications. I was amazed to see a dozen tweaked Windows XP Sp3. There was a Black Edition, a Blue Edition, crystal Edition, Silver Edition, Gold Edition, etc etc etc. These tweaked Windows are cool, I remembered installed a couple of these on my friends’ PC, they have all the essential software pre-installed but they get corrupt too early so not my option today and I pick a Plain Windows XP SP3.

Backup

Reached home, turned on my PC, copied all my data from C drive to D which included FireFox bookmarks, pics in My document folder and MSN chat logs in My Received files. I don’t keep much  in my Windows Drive.

Installation

Inserted the CD in the drive, booted the system from CD, waited till the installation menu appear. As usual I chose C drive as my Windows installation drive and NTFS as the file system, waited till the Windows install.

Drivers

I have a ASUS board. i have downloaded the latest drivers from there support web site a couple of months ago. Installed them, restarted my PC.

Partitioning : Again!!

A stupid idea struck my mind, “I have too many partitions, lets reduce !”. So I installed the old trusty Symentec Partition Magic 8.0 and merge my last 2 partition. All was going well until I got an ERROR

“Partition Merging Not Done!!!! Completed with error”

My heart nearly came to my mouth, all my e-books, all my software ( cracked ones of course ), all my songs ( saving since 4 years ) , video ( etc etc) all may be gone. I opened My Computer, both the drives gone !!!! I nearly cried. I tried the old method of making things work – I restarted Windows. To my surprise a merged partition appeared, thank u God. But with one problem. When you merge two drives , the second drive becomes a folder in the first drive. This happened with me too, as was expected. The problem was , I could not get the folder to open, this time one more stupid error

“Access Denied”

What to do now??!? Once again I opened the not so trusty Symentec Partition Magic. All looked fine there. I performed a disk error check and got one more error

“Disk has blah blah blah errors”

This was enough, I remember there was one another partition manager, Paragon Partition Manager. I downloaded it , installed it and to my surprise its partition explorer was showing the second drive’s folder content. A slight relief. I quickly copied all my drive’s data to another one. One more problem – The folder size was 27GB and it was taking my disk space. I need this folder to be deleted ASAP. The software didn’t help much in removing disk errors but at least saved my data.

The Last Stand

Tired, frustrated cursing Symentec for the buggy software and incomplete troubleshooting guide I converted the whole partition to FAT32. To my surprise the folder was back again without error.

Problem solved 🙂

Softwares I installed

Most of them are here in this Link

Windows Password Dumper

I have made a Windows Password Dumper for my software house. Its 50% complete so far as I have yet to include the brute force and dictionary i made separately. Rainbow attack is yet to be made. This code is also not complete  with a few bugs. The Password Dumper is complete 90%, the rest you will find out. I cant upload the complete code when the project will be finished as I don’t own the project, my software house does. Yet there is lot much in it for one who wants to AUDIT the windows passwords.

This software requires Administrative rights to execute. So log in as the system administrator before running it. I have yet to complete the log in process so that a normal user can log in as administrator within the application.

I have only tested on Windows XP. It might work fine on Vista. No clues about Windows 7.

What it Does??

  • Get windows Password Hashes
  • Get Plain text passwords for few accounts
  • The above 2 features on remote PC within the same network

What it will Do when it will be Completed?

  • Run a brute force attack on the password hashes
  • Run a dictionary attack on the password hashes
  • Run a rainbow attack on the password hashes
  • And the most important one ( according to Boss ), a better GUI.

Download

It also require .Net Framework to run. You can download Microsoft .Net Framework 2.0 here

MS .Net Famework 2.0

If you want to edit the Password Dumper, you can edit the code using NotePad++ and then run the batch file to compile he code. Before that you have to install MinGW.

MinGW GCC for Windows

Note: This software is made purely for auditing purposes. I hold no responibilty for anything that this software does or any misuse of the software for illegal purposes.

Thanks to the creator of pwdump, pwdump2, pwdump3 and lsadump for open sources.

Windows 7 beta 1 from Microsoft website

32 bit

http://download.microsoft.com/download/ … EN_DVD.iso

64bit

http://download.microsoft.com/download/ … EN_DVD.ISO

Hardware Requirements:

  1. 1 G Hz 32-bit (x86) or 64-bit(x64) processor
  2. 512 MB RAM
  3. 20 GB hard disk space (5 GB for installtion)

Download, burn it into a DVD and install.

The above links are no valid as Microsoft has decided to end the Testing Subscription. Still you can download it from somewhere else. You can download a torrent too, like from www.piratebay.com